The LaserAce® 300 is a sophisticated surveying and mapping tool that will help you work faster than ever before. Don't worry about the terrain or conditions as MDL's LaserAce® 300 means you can now survey dangerous or inaccessible areas in complete safety from one location.
The MDL LaserAce® 300 sets new standards in hand-held measuring equipment. Requiring no prisms or special targets, this simple but powerful tool combines an eye-safe laser with an inclinometer to measure plan and slope distances as well as heights. 3D measurements including missing distances, perimeters and areas can all be plotted by adding the optional digital compass or encoder. Ideal also for “filling-in” points, which cannot be occupied with GPS equipment.
LaserAce® 300 is a high performance ‘hand held’ reflectorless Laser Measurement System, incorporating an inclinometer and (optional) solid state fluxgate compass. Operating the system couldn’t be easier, just point and shoot at any target with the aid of the integral ‘red dot’ aiming sight. Readings immediately appear on the back panel LCD display.
LaserAce® 300 is suitable for outdoor and indoor operations and will measure to all types of materials at ranges up to 300 meters, with many unique internal computer functions including 2 and 3 point heighting, slope measurement, area and perimeter calculations.
The LaserAce® 300 is powered by 2 internal AA batteries and weighs only 600 grams.(1lb.) An RS232 data port is provided to output raw and calculated data to peripheral devices such a computers, data loggers and printers.
Features and benefits include...
- Remote Distance Measurements
- GIS Data Acquisition
- GPS Offsets
- Utility Asset Mapping
- Microwave Path Surveys
- Face Profiling
- Stockpile Measurements
- Accident Reconstruction
- Environmental Monitoring
- Forensic Surveys
- Ground Surface Modelling
- Forestry Management
Additional firmware and accessories may be required to make the LaserAce® 300 suitable for some these additional functions.
Click here for demonstration
Click here for pdf datasheet
See www.laserace.com or email sales@impact-sales.co.uk for a brochure giving full details, specification and options available for this full specification surveying laser system!
Specification
Laser Eye Safe Class 1 CENELEC EN60825-1/FDA
Range: Passive up to 300m. Reflectors to 5km
Range Accuracy: Typically +/-10cm
Range Resolution: 1cm
Measurement Time: 0.3 sec
Alignment Telescope Red Dot Scope / optional telescope
INCLINOMETER
Type Accelerometer
Range -90º to + 90º
Accuracy 0.3º at 0º
Resolution 0.1º
TECHNICAL DATA
Custom Backlit LCD Display
Selectable units: Meter/feet, Degrees/Gons
Internal functions: Range, 2 & 3 Point Height, Slope, Missing distance, Perimeter and area calculations
Data: I /O RS232 4800 or 9600 Baud rate
Operating Temperature: -10º to + 45ºC
Power: 2 x AA cells internally
Water & Dust Resistant IP65
Dimensions: (L x W x H) 175 x 106.5 x 56mm
Construction: Reinforced Polycarbonate
Soft Carry Bag
Weight: 600g
